• Bowl 362 Mesquite

    This is one of about 8 bowls I have turned from some Mesquite a good friend brought back from Texas on a trip to visit his family. I really love this one as you can really see where the branch came out of the linb on this one.

  • Bowl 361 Walnut

    This is another bowl produced from the Knoxville Walnut. To give you an idea it took two trips to get the sections of wood down to Atlanta and will probably produce about 14 bowls that are 12-13 inches in diameter.

  • Bowl 360 Red Maple

    I was most pleased with this maple tree from Roswell. It was very healthy when it came down and the wood was very clean. This bowl will make someone a wonderful salad bowl.

    If there is a downside to Red maple its a grayish crust that forms on the wood during drying. I have seen this also on Bradford Pear, however the Pear is “easier” to remove, however in either case both take a long time to sand through to the clean wood.

  • Bowl 359 Walnut

    Another of the bowls turned from the Knoxville Walnut. You can see insect damage on the inside of the bowl, left side. It looks like black dots.

  • Bowl 355 Walnut

    The Walnut Wood came from my uncles home in Knoxville, TN. This bowl again was turned vertically and the pith is located in the bottom of this bowl. Because of the way it was turned the cambria (white wood) surrounds the main hardwood. When it was first turned fresh he white was really white but as it dried the darker tones set in and changed it completely.

    For now this is my “Keeper” for the year.

  • Bowl 354 Red Maple

    This bowl is from a very old, very healthy Red Maple tree that was removed from a Condo in Roswell so that Plumbing and sewer issues could be addressed.

    The bowl was turned vertically from the trunk, meaning that the pith is located on the bottom of the bowl and not eliminated from the top edge of the bowl.

    Anyway its very white except for a bit of inner bark and some contrasting sawdust used to fill a crack that arrived during drying.

  • Red Maple Falling !!!

    This photo is of a double trunked Red Maple that is located in the neighborhood. It was at the point where the tree was rotting at the split and the tree was going to fall in the near future either on a house or the street or a car in the street.

    I happened to be there when the final cut came. You can see the tree is just starting it’s controlled fall.

    The crew providing the expertise is Northside Tree Professionals. They do really great work and always have fair pricing.

    As of this writing I have just begun to turn the wood and the bowls will be wonderfully white with red speckles…stay tuned!

  • Reverse Chuck

    Over the winter I built this much larger reverse chuck. This one is capable of holding bowl with the maximum diameter of 17 inches. By using various size carriage bolts the bowl’s height is only limited by my ability to carve.

    You can also build these to any size limited only to what you can manage on your lathe. In the case of the Laguna, I can turn up to 30 inches in diameter off the end of the lathe.

    A reverse chuck is used to finish the bottom and is the last turning procedure done prior to sanding and finishing.

  • Bowl 345 Turnbull Oak

    This is a bowl that has a great story behind it….

    I was approached by a guy that heard I was interested in finding fallen trees. Well it turn out He had two very old Oaks fall over in his back yard during the storm of April 2009. He saved me a bunch of piece from the very base of on 200 year old Oak. I turned about 6 bowls for him to give away as Christmas gifts to friends and family.

    Being wood from the base, it had been around a long time and had collected all sorts of stone, dirt and other stuff. This, growth and age performed wonders on the grain.

  • Bowl #327 Tulip Poplar

    Here again is another piece of Tulip Poplar that was allowed to rest a bit and have Mother nature do her artwork before I did mine. Origionally purchased as a wedding gift my friend and very first Patron decided to keep it and purchase something else for the wedding couple. This bowl still resides in the neighborhood and is known as “The Keeper”.

Jeff Weigant (1952-2016) fondly known as Jeff, the woodguy, was cherished by many. This archive showcases a selection of his artful creations, celebrating his remarkable talent.